--> TICT | Disposable Data Logger | Logtag | Tech Instrumentation | Data Collectors
Cart 0

TICT Low Cost Disposable Temperature Recorder w/ Alarms

No reviews
  • $7.90

Qty Price
1 $7.90
10 $7.11
30 $6.32

Call 303-841-7567 For QTY Pricing Over 50 Units

The LogTag® TICT is a low cost disposable electronic temperature indicator for use in monitoring temperature & time statistics in transport applications of up to 45 days duration


The LogTag® TICT can monitor and record statistics against four factory pre-set temperature limits for up to 45 days, displaying 'OK' if environmental conditions remain within limits. If temperatures exceed two high temperature alarm limits or go below two low temperature alarm limits, the LCD shows a 'REJECT' alert, indicating the goods require further checking.

    • 2 upper and 2 lower temperature alarms
    • 'Tick'/'Cross' display shows temperature alarm status
    • Download of statistical data via optional interface
    • Collect daily minimum/maximum temperature statistics for up to 45 days
    • Interface cradle available (One required per location regardless of number of loggers)

    The LogTag® TICT is factory pre-configured for one of a range of monitoring profiles. Special profiles are available on request, subject to conditions.


    Statistical data can be downloaded using a dedicated LogTag®Interface Cradle and freely available LogTag® Analyzer software.



    Sensor Measurement Range -25°C to +60°C (-13°F to +140°F).
    Operating Temperature Range -25°C to +60°C (-13°F to +140°F).
    Storage Temperature Range 0°C to +40°C (32°F to +104°F).
    Rated Temperature Reading Accuracy Better than ±0.5°C for -10°C to +25°C.
    Better than ±1.0°C for -25°C to -10°C
    Better than ±1.0°C for +25°C to +60°C.
    Actual performance is typically much better than the rated values. Please see the Rated Absolute Accuracy chart below.
    Accuracy figures can be improved by recalibration.
    Rated Temperature Reading Resolution 0.1°C for -20°C to +60°C.
    LogTag Analyzer® currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag®.
    Sensor Reaction Time Typically less than 7 minutes (T90) in moving air (1m/s).
    Recording Capacity Minimum & maximum temperature for each of the 45 days.
    1st activation of each alarm for each day including trigger time and duration of each event.
    Please note the TICT does not store each individual temperature reading taken.
    Sampling Interval Factory pre-set between 1 and 59 minutes; 5 minute interval for profile 0001.
    Logging Start Options Push button start. Factory pre-set between 1 and 255 minutes; 60 minute delay for profile 0001.
    Recording Indication OK ✔ = Temperature has remained within the alarm limits.
    Reject X = Alarm event has been generated
    Alarm events Four factory pre-set alarm events, two over temperature and two under temperature.
    Each alarm event can be instant reject or accumulative reject. It can also be disabled.
    Environmental IP64.
    Power Source 3V Li-Mg Battery.
    Battery Life Minimum storage life of 18 months before ‘start’.
    Monitoring period: 45 days.
    Minimum accessibility (display) period of 6 months after ‘stop’.
    Real Time Clock Built-in real time clock.
    Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day).
    Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).
    Size 71.5mm(W) x 33.0mm(H) x 8.6mm(T).
    Weight 23g.
    Case Material Polycarbonate.



    Interface Cradle

    LogTags® unique interface cradle design provides rapid and reliable data transfer to LogTag® Analyzer software in a matter of seconds. By far the fastest in its class.  Click here for Interface Cradle details

    Protective Enclosure

    The LogTag® Protective Enclosure is specifically designed for use with LogTag® recorder products and allows LogTags® to be used in harsh environments.  Click here for Protective Enclosure details

    Wall Mount Bracket

    The LogTag® Wall Mount Bracket provides an easy and tidy solution to mounting a LogTag® on a wall, door or vertical surface while still allowing easy removal of the LogTag® for inspection or download.  Click here for Wall Mount Bracket details


    EMC Compliance

    Tested and complies with EC EMC directives (EN 50081-1:1992 & EN 61000-6-1:2001) see LogTag® TRIX CE mark EMC declaration of conformance

    Tested and complies FCC Part 15 Subparts A and B. see LogTag® TRIX FCC EMC declaration of conformance

    EN12830 Compliance

    LogTag® TRIX-8 is tested and complies to EN12830:1999 for transport, storage and distribution of chilled, frozen, deep frozen, quick-frozen food and others. See LogTag® TRIX-8 EN12830 TÜV declaration. (Full TÜV test report number 2850509_001 available on request.)

    WHO Compliance

    The LogTag® TRIX-8 recorder is approved by the World Health Organisation's (WHO) Performance, Quality and Safety (PQS) standard and listed on the WHO website.
    WHO PQS Prequalified under E06 devices : PQS Code E06/06

    FDA CFR21 Part 11 Compliance

    Designed for FDA CFR21 Part 11 Digital signatures

    RoHS Directive

    The RoHS Directive stands for "the restriction of the use of certain hazardous substances in electrical and electronic equipment". This Directive bans the placing on the EU market of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants.