Tech Instrumentation >> Pocket Thermometers

DFP450W
Our NEW DFP450W Digital Pocket Test with adjustable Temperature Alarm was specifically designed for the harshest foodservice environments. The Instrument can be programmed to provide a visual alarm (blinking display) once the set temperature is reached. The initial default alarm temperature is 140oF (60oC). Potentially hazardous mercury thermometers are often used to check the extreme water temperature of commercial dish water. Eliminate the risk of a mercury spill; the DFP450W stores the maximum heat registered and is waterproof. Guaranteed Accurate for Life means there is no need of field adjusting of calibration settings and no risk of introducing error into the instrument.

LCD	.25"
Auto Off	After 10 minutes of non use
F/C Switchable	Yes
Waterproof	Yes
Warranty	Lifetime
Calibration	Accurate for Life
Features	Maximum and Minimum Temperature Memory, plus Hold Mode
	Reduced tip for delicate products and quick (<6 seconds) response time.
	Adjustable Temperature Alarm
Certifications	NSF, CE, WEEE, RoHS
Temperature Range	-40° to 450°F / -40° to 232°C
Temperature Accuracy	±2°F/1°C
Resolution	0.1°F/°C
LCD Height	.25" / 6.35cm
Sensor Type	Thermistor
Shaft Length	4.625" / 11.75cm
Battery Type	1.5v #392
Weight	0.7 oz

Price: $31.00

# LR44 Battery - Package of 6
For new style DFP450W with Alarm Feature - Add $11.70

# 392 Battery - Package of 6
For old style units with recalibration feature - Add $11.70

Quantity:

PT100
Low Cost Digital Stem Thermometer

This economical thermometer is great where you need low cost yet accurate temperature measurements. It features 2 degree accuracy and an easily read LCD display.

Features:
Auto shut off after 10 minutes - conserves the battery
C/F selectable
5" stainless steel stem
Range: -58 to +302°F (-50 to 150°C)
Accuracy:   +/-2°F (+/- 1°C)
Resolution:   0.1° from -19.9°to +199.9°, 1.0° elsewhere
Display Update Rate:   1 second
Battery:   1.5 volt type 393 or equivalent (Included)
LCD size:   0.35" (H) x 0.71" (W) -- 9mm (H)*18mm (W)
Head Diameter:   1.4"
Environmental Operating Temperature Range:   14 to 122°F (-10 to 50°C)
Warranty:   90 days

Price: $10.90

Replacement Batteries, 6 pack
$9.49

Quantity:

DW350SS

Completely Submersible, Dishwasher Safe, fully waterproof digital thermometer with a special calibration feature. Large (almost 1/2" high) digits make the display exceptionally easy to read. Features a fast (8 second) response time and accuracy suitable for use in food service environments. The stainless steel stem and head mean it's rugged enough to hold up in demanding professional environments.

Specifications
Range: -40 to 350 F, -40 to 180 C, 0.1 Degree Resolution
Probe: 5" stainless steel with quick response tip
Response Time: 8 seconds, Sampling Rate 1 Second
Accuracy: +/- 2 F (1C) from -10 to 212 F (-23 to 100 C). +/- 4 F (2 C) over remainder of range

Features

Stainless Steel Head & Stem
Waterproof, Dishwasher Safe
F/C Switch
Data Hold Switch
On/Off Switch (auto shut-off after ~10 minutes)
Maximum Reading Switch (for testing dishwashers)
Calibration Feature - Calibration instructions included.
Includes LR44 Battery. 1 Year Warranty

Price: $22.00

LR44 Batteries - Package of 6
Add $11.70

Quantity:

People who bought this item also bought:

1. IRTN400L1

2. DT400

TTM59
Pocket Test Plus Thermometer with 3 Timers
Features:

LCD has digital clock and date (month & day) read out and the ability to choose standard or military time formats

3 separate timers and distinctive alarms

Certifications: NSF, CE
Temperature Range: -4° to 350°F / -20° to 177°C
Temperature Accuracy: ±1°F / ±0.5°C
Resolution: 0.1°F/C
LCD Height: 0.4" (1 cm) with 0.2" (5 mm) characters
Waterproof Rating: IEC 529 IPX7
Housing Material: Polycarbonate housing and sheath with silicone rubber buttons
Sensor Type: Thermistor
Response Time: Less than 6 sec
Shaft Length: 4.75 in (12.07 cm) type 304 stainless steel
Shaft Diameter: 0.15" with 0.085" reduced diameter tip (3.8mm with 2.1mm tip)
Battery Type: CR2032, 3V Lithium
Weight: 0.11 lb (52 gms)
Dimensions: 1.75" x .8" x 6.625" (4.4 cm x 2 cm x 16.8 cm)

Price: $38.00
Quantity:

4005i
The Cooper-Atkins Model 4005i will measure pipe temperatures quickly and easily without a lot of equipment utilizing a claw type pipe clamp probe. Temperature registration is shown on a built-in digital LCD display. This unique instrument also allows measurements of liquids and solids with its retractable general-purpose probe hidden in the handle. Features include auto shut-off after 5 minutes of non-use, hold, max and min. The temperature range of this instrument is -20° to 300°F (-29° to 149°C). The Cooper model 4005i comes standard with a soft carry case including a belt loop so you can easily keep the instrument with you at all times.

Features:
-20 to 300 degrees F (-29 to 149 C) range
+/- 3 degree accuracy from 14 to 212 F
90 Second response time on a 140 F pipe
20 Second response time with swing out probe in water
Includes:
LR44 button cell battery
Rugged padded soft case with velcro belt loop

Price: $136.00
Quantity:

P250
Our P250 easily fits in a pocket or a bag. The probe clips safely & securely to the side of the thermometer, out of harm's way when not in use. The P250 switches on when the probe is swung away from the instrument case and switches off when it is folded back.

* Reduced tip probe for faster readings.
* Probe can be angled to suit usage.
* Readings clearly shown on the large LCD display.
* Type T thermocouple measurement range covers frozen foods to hot plates, fats and oils.
* °F or °C display.
* LEDs for error free indication of temperature zones.
* Auto switch off for even longer battery life.
* Flashing LEDs for Instant Temperature Indication:

Yellow for cold holding (below 40°F).
Green for hot holding (140°F to 180°F)
Red for cooked ground beef (160°F).

* 9 Volt Alkaline Battery. Battery Life 300 hours minimum.
* Type T Thermocouple Sensor.
* -58°F to +482°F Range.
* 0.1° Resolution. Ambient operating range is -4°F to 122°F, 10 to 90% RH non condensing.
* Auto Shut Off After 5 minutes.
* Dimensions: 6.7" (probe retracted) x 2.0" x 0.94" with 4.3" Probe.
*Order as P250C for Degrees Celcius

Normally $129.00, SALE PRICE
Price: $109.00

Quantity:

TL1A Series

The TL-1A thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used.

The TL-1A is an improved version of the original ThermoProbe model TL-1. The TL-1A incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the TL-1A has accuracy, repeatability and long-term stability. But unlike those thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most electronic thermometers, the “Cordless” TL-1A has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration or battery removal. Low battery display, and failure mode indications protect the user from false data.

4 Point NIST Traceable Calibration and a one year warranty included. We can add a certification point at 115 degrees for an extra charge.

Specifications:

Display:	LCD with 0.25 inch characters Trend Indicating Arrows Low Battery & Fault indication
User Functions:	Auto Off after 20 minutes or continuous operation Lowest Reading, Highest Reading, Average Reading Switchable in Units of °F or °C
Construction:	Stainless Steel temperature sensor; Standard length is 8", 21cm with narrow sensing tip. Standard probe diameter is 1/4" (6.35mm) with reduced diameter tip of 3/16" (4.76mm) Sensor mount acetyl plastic Electronics and display in 3.5" x 1.2" anodized Aluminum enclosure Molded Silicone seal. Highly durable display window, graphics and membrane switches.
Weight:	3 ounces, 93 grams
Temperature:	-44 to 600°F, -43 to 315°C Complete Range Resolution 0.01 Degrees Calibrated Accuracy (NIST Traceable Report of Test): ±0.1°F from 14 to 320°F ±0.07°C from -10 to 160°C Typical (untested) Accuracy: +-0.2°F below 14 and above 320°F +-0.12°C below -10 and above 160 °C (Special calibrations are available to guarantee accuracy outside of the normally guaranteed range)
Temperature Response:	14 seconds in water bath.
Electronics:	Ultra Low Power Microcontroller FLASH Memory 20 bit A/D Converter Recommended Temperature Range For Best Accuracy 32 to 112 °F, 0 to 44°C 100 Ohm, Class A 1/3 DIN RTD Immersion depth 4", 11cm
Battery:	20mm Coin Size 3V Lithium, Duracell Type CR2032 400 hour service life at 70°F, 21°C Battery Operating Range -4 to 130°F, -20 to 54°C Note: Battery may not provide adequate power below 40°F, 4°C
Options:	Stem length to 39", 1 m. Custom lengths available. Separate probe with high temp PFE cable Available in rugged field version, TL-1W Certification by independent calibration laboratory
Future:	Intrinsically Safe Certification Serial Cable and User Software

Due to the special calibration on these meters, please allow approximately 7 to 10 days to ship. Includes certificate of calibration at the following approximate points: 32, 120, 199 (200) and 300 degrees F. We can also certify at 115 degrees F for an extra charge (below)

Price: $475.00

Choose either TL1A without Extra Point Certified
No Extra Charge

Select Stem Length

Or Choose the TL1A with the extra 115 Degree F Certification
Add $76.00

Select Stem Length

Quantity:

P125F
Our P125F fits in a pocket or a bag, and the probe clips securely to the side of the thermometer, out of harm's way. It switches on when the probe is swung away from the instrument case and switches off when it is folded back. No buttons or adjustments required.

* Tapered probe for faster response.
* Probe swings open to switch on instrument.
* Probe can be angled to suit usage.
* Readings clearly shown on the large LCD display.
* Thermistor accuracy meets all food hygiene regulations.
* LEDs for error free indication of temperature zones.
* °F display.
* Auto switch off for even longer battery life.
* Flashing LEDs for Instant Temperature Indication:

Yellow = cold holding (below 40°F).
Green for hot holding (140°F to 180°F).
Red for cooked ground beef (160°F).

* -40°F to +257°F range.
* 0.1° Resolution, ±0.9°F Accuracy From -4°F to +158°F.
* Auto Shut Off After 5 minutes.
* 600 hours minimum battery life (9 V Alkaline).
* Case 6.7" (probe retracted)x 2" x 0.95", Probe is 4.3" Long and the tip is 0.06" diameter.

New - Lower Price!
Price: $109.00
Quantity: