Tech Instrumentation >> Thermometers with Alarms

A150Q-CERT
Model A150Q with Long Form Certification

The A150Q is a popular choice for monitoring refrigerators & freezers and many other applications. A high and low alarm can be set if desired. While in an alarm condition, the A150Q beeps for 5 seconds out of every minute. If the unit returns to a non alarm condition, the unit stops beeping. The min/max memory can be used to see the highest and lowest recorded temperatures since the memory was last cleared.

Features:
Includes Long Form Certificate of Calibration with Data. Certified at 32°F and 100°F.
Displays ambient & remote temperature (switch between one and the other)
Min/max temperature memory
High/low audible temperature alarm
Room & remote (outdoor) sensor temperature switch
°F/°C switch
Backlight
Waterproof Sensor - suitable for aquarium use
Foldaway stand

Specifications:
Ambient temperature range: 14° to 122°F (-10° to 50°C)
Remote temperature range: -58° to 158°F (-50° to 70°C)
Resolution: 0.1°
Accuracy: ±1.8°F (±1°C)
Sampling rate: 10 second
Cord length: 10 ft. (3m)
Display size: 1.88” x 0.82”
Dimensions: 2.87” x 2” x 0.6”
Power source: 1 “AAA” battery

Supplied With:
Long form Certificate of Calibration Battery
Probe Mount Clip
Velcro mounting tape

Note: Since the certifications are performed just prior to shipping, this item usually requires 2 or 3 days to ship.

Price: $54.00

Quantity:

A150Q
The A150Q is a popular choice for monitoring refrigerators & freezers, aquariums, terrariums, outdoor temperature in cars, computer equipment and many other applications. A high and low alarm can be set if desired. While in an alarm condition, the A150Q beeps for 5 seconds out of every minute. If the unit returns to a non alarm condition, the unit stops beeping. The min/max memory can be used to see the highest and lowest recorded temperatures since the memory was last cleared.

Features:
Displays ambient & remote temperature (switch between one and the other)
Min/max temperature memory
High/low audible temperature alarm
Room & remote (outdoor) sensor temperature switch
°F/°C switch
Backlight
Waterproof Sensor - suitable for aquarium use
Foldaway stand

Specifications:
Ambient temperature range: 14° to 122°F (-10° to 50°C)
Remote temperature range: -58° to 158°F (-50° to 70°C)
Resolution: 0.1°
Accuracy: ±1.8°F (±1°C)
Sampling rate: 10 second
Cord length: 10 ft. (3m)
Display size: 1.88” x 0.82”
Dimensions: 2.87” x 2” x 0.6”
Power source: 1 “AAA” battery

Supplied With:
Battery
Probe Mount Clip
Velcro mounting tape
Optional Certificate of Calibration
Price: $24.00

Check this box for the Optional Certificate of Calibration with Data. Individually Tested at 32 & 100 Degrees F
Add $30.00

Quantity:

People who bought this item also bought:

1. 2180

2. 25HP

EMR812 with remote model THR138
Features:
     Base Station Model EMR899
    Wireless Temperature Data Transmission from 3 Different Remote Sensor Units
    Jumbo LCD Displays for Easy Reading
    ºF/ ºC Selectable
    Memory for Min/Max Indoor and Outdoor Temperature
    High and Low Temperature Alarm Setting for All Remote Channels
    Shows Temperature Trend in Graphic Display (Rising, Steady, Falling)
    Easy Installation as no Wires are Required
    Wall Mountable or Table Standing Features Provided
    Includes one Remote Sensor Model THR138
    Designed to be Weatherproof with LCD and LED Indicator
    Wall Mounting Feature

Specifications:

     Base Station
    Temperature Range: 23 ºF to 122 ºF
    Resolution: 0.2 ºF
    Power Source: 2M size 1.5V Batteries (not included)
    Low battery indication
    Dimensions: 4.6 x 4.2 x 1.1 in.
    Weight (without batteries): 5.25 oz

      THR138 Remote Sensor
    Temperature Range: -4 ºF to 140 ºF
    Transmission Range: approx. 90 feet (depends on the location of sensor in relation to base station)
    Transfer Rate: Every 30 Seconds
    Power Source: 2 (AAA) 1.5V Batteries (not included)
    Dimensions: 3.5 x 2.3 x .75 in.
    Weight (without batteries): 2.8 oz

Supplied With:
    1 THR138 Wireless Temperature Sensor

Optional Accessories (order below):
    THR138 Wireless Sensor
    THC138P Wireless Sensor with Waterproof Probe
(Extra Remote Sensors can be ordered by clicking here)
Price: $68.00

Quantity:

IRTN408
Professional infrared laser thermometer with advanced temperature processing; In addition to the non contact temperature measurement this model offers the ultimate in flexability by including a built-in socket that accepts commercially available K-type thermocouple probe (See options) for internal temperature measurements.

Features:

• Laser sight for easy targeting
• Infrared Temperature Range -76° to 932°F (-60° to 500°C)
• Infrared Accuracy ±2% of reading or ±2°C
• Thermocouple Accuracy ±1% of reading or ±1°C whichever is greater
• 0.1° resolution for accurate readings
• Selectable temperature units F/C
• 11:1 Distance to spot size ratio
• Emissivity (preset to 0.95) is Adjustable from 0.10 to 0.95 in 0.01 steps
• Bright large amber back-lit LCD display
• Measure modes (selectable for IR or probe) include Maximum, Minimum, Difference (Max-Min) and “Lock” for continuous temperature scanning (Lock also disables the automatic shutoff for longer term tests)
• Programmable High and Low temperature Alarms with audible “beeper”
• 2 AA batteries (included) typically provide 180 hours continuous operation
• Automatic power OFF after 1 minute (Disabled when thermometer is in Lock mode)

For air or internal temperatures, you may add the plug in thermocouple probe model 31901K Needle Probe or 31903K Air Probe. See the optional probes below, or choose from any of our other type K thermocouple probes.
Click here to order other optional thermocouple probes for use with this thermometer

Price: $109.00

Optional Model 31901K Needle Probe (for internal temperatures)- Add $42.00

Optional Model 31903K Air Probe (for air & gas temperatures) - Add $49.00

Optional Model 14057 Padded carry pouch with belt loop
- Add $19.00

Quantity:

IRTN40-20-WR
Professional infrared laser thermometer with advanced temperature processing; In addition to the non contact temperature measurement this model offers the ultimate in flexability by including a built-in socket that accepts commercially available K-type thermocouple probe (See options) for internal temperature measurements.

Features:

• Laser sight for easy targeting
• Infrared Temperature Range -76° to 1400°F (-60° to 760°C)
• Infrared Accuracy ±2% of reading or ±2°C
• Thermocouple Accuracy ±1% of reading or ±1°C whichever is greater
• 0.1° resolution for accurate readings
• Selectable temperature units F/C
• 20:1 Distance to spot size ratio (the diameter of the measured target area increases by 1" for every 20" the thermometer is from the target)
• Emissivity (preset to 0.95) is Adjustable from 0.10 to 0.95 in 0.01 steps
• Bright large amber back-lit LCD display
• Measure modes (selectable for IR or probe) include Maximum, Minimum, Difference (Max-Min) and “Lock” for continuous temperature scanning (Lock also disables the automatic shutoff for longer term tests)
• Programmable High and Low temperature Alarms with audible “beeper”
• 2 AA batteries (included) typically provide 180 hours continuous operation
• Automatic power OFF after 1 minute (Disabled when thermometer is in Lock mode)

For air or internal temperatures, you may add the plug in thermocouple probe model 31901K Needle Probe or 31903K Air Probe. See the optional probes below, or choose from any of our other type K thermocouple probes.
Click here to order other optional thermocouple probes for use with this thermometer
Price: $229.00

Optional Model 31901K Needle Probe (for internal temperatures)- Add $42.00

Optional Model 31903K Air Probe (for air & gas temperatures) - Add $49.00

Optional Model 14057 Padded carry pouch with belt loop
- Add $19.00

Quantity:

DTT361
Perfect Roasts / Meat & Food Every Time are possible with the DTT361. The 3 ft. cord has a stainless steel overbraid so you can leave the 6" probe in the meat while it's cooking. Set the temperature on the DTT361 and it will beep when your meat is done. You can also monitor the temperature while it's cooking which enables you to adjust the oven temperature if you find it's not cooking fast enough. Great for BBQ's! Can be used with steak, chicken, fish etc. This is a "must have" tool for every serious cook!

Features & Specifications

3 ft. stainless steel overbraid cord
Magnetic back & flip out stand
Temperature Range 32 to 392 F (0 to 220 C)*
Includes AAA Battery (approximate 1 year battery life)
Built in Clock / Timer

*Special Comments
This product has been used with excellent results by many thousands of customers but there are a couple of points that must be remembered in order to provide you with the best experience. The first caution is that the probe tip and wire are rated for a maximum temperature of 392 degrees. This means that the probe will be damaged if the tip or cord are exposed to open flames, direct contact with heating elements, very hot ovens or BBQ's etc. The cord is designed to allow an oven door to close on it without damage, but if there is an extremly sharp bend in the cord (certain BBQ lids for instance can do this), the cord can be damaged. When cleaning the probe, don't allow water to flow down inside of the probe tube or plug as the readings will be inaccurate until it dries out. It should only be cleaned with a damp, soapy cloth. Wiping it down with alcohol is fine too when you want to sterilize it. Just be sure to allow the alcohol to dry before use in foods again. While failure to follow these simple precautions may void your warranty, following these few reasonable precautions will provide you with years of perfectly cooked foods!
NETQUOTEVAR:LINK

Price: $38.90

9335 - Optional Extra Probe
Add $15.30

Quantity:

WBT700
Cooking Thermometer with wireless remote pager.

Just set the desired temperature for your food (or select Rare, Medium Rare, Medium or Well Done, then place the probe in the food and walk away! Monitors the temerature of the food in the oven or on the grill and pages you when it's done. Use the remote pager to view the temperatue while the food is cooking.

• Compact Wireless Pager with remote temperature monitoring
• Cook Temp and Set Temp at a glance
• Timer Function in Main Unit and Pager
• Stainless Steel Probe with 3ft Cable
• Power Source 2 pc AAA (Main unit)
• Power Source 2 pc AAA (Remote unit)

*Special Comments
This product has been used with excellent results by many thousands of customers but there are a couple of points that must be remembered in order to provide you with the best experience. The first caution is that the probe tip and wire are rated for a maximum temperature of 392 degrees. This means that the probe will be damaged if the tip or cord are exposed to open flames, direct contact with heating elements, very hot ovens or BBQ's etc. The cord is designed to allow an oven door to close on it without damage, but if there is an extremly sharp bend in the cord (certain BBQ lids for instance can do this), the cord can be damaged. When cleaning the probe, don't allow water to flow down inside of the probe tube or plug as the readings will be inaccurate until it dries out. It should only be cleaned with a damp, soapy cloth. Wiping it down with alcohol is fine too when you want to sterilize it. Just be sure to allow the alcohol to dry before use in foods again. While failure to follow these simple precautions may void your warranty, following these few reasonable precautions will provide you with years of perfectly cooked foods!

Price: $39.00

Quantity:

HLA1
High and Low Alarming Cooking and Cooling Thermometer
VERIFY HACCP TEMPERATURES FOR BOTH COOKING AND COOLING.
Alarm sounds when pre-set temperature is reached, either rising (cooking) or falling (cooling), or alarm can be set for use with the timer function.

Cooking:

Read internal food temperatures instanly.
Close oven door safely on stainless steel probe.
Verify critical temperatures with high temperature alert feature.

Cooling:

Verify cooling period by the lower limit temperature alert feature.
Ensure foods are cooled to 40°

Other Features:

Count up and count down timer
Clock
Adjustable stand with magnet
ATT865 replacement probe sold separately
Range: 14° to 392°F, -10° to 200 C

Note: Please use care with the probe. During cooking, cooling or cleaning - the probe sensor may be damaged if water gets inside of the probe tube. Simply use care not to immerse the entire probe.

Price: $32.00

Quantity:

EMR963HG - Wireless Temperature & Humidity Meter with 1 Remote Sensor
Set high and low alarms for temperature and humidity. An alarm condition causes the display to flash on and off and an audible alarm to sound for one minute. After one minute, the audible alarm stops in order to conserve battery life, but the display continues to flash on and off until any button has been pressed. Alarms can be disabled if desired. It’s great for monitoring coolers, refrigerators and freezers, computer equipment and more.

Just place the smaller remote sensor outdoors, in your computer room, in your cooler or wherever you want to monitor a remote temperature then place the base unit in a convenient location. You'll then be able to view the remote and local temperatures at the same time. You can add up to two additional remote sensors and monitor 3 remote locations at once.

Features:
Monitors temperature & humidity from up to 90 feet away
°F and °C selectable
Up to 3 sensors may be used with base station
Jumbo display
Min/max memory
Temperature Alarm
Trend information
Comfort indicator

Specifications:
Outdoor temperature range: -58° to 158°F (-50° to 70°C)
Indoor temperature range: 23° to 122°F (-5° to 50°C)
Indoor & outdoor humidity range: 25% to 90%
Temperature resolution: 0.2°F (0.1°C)
Humidity resolution: 1%
Transmitting range: up to 90 ft.
Transmission interval: approximately every 30 seconds
Transmission frequency: 433 MHz
Power source: Transmitter - 2 “AA” batteries; Receiver - 2 “AA” batteries (included)
Dimensions: Transmitter - 4-1/2” x 4-1/4” x 1”; Receiver - 3-5/8” x 2-1/4” x 3/4”

Supplied With:
1 wireless temperature/humidity sensor Model THGR268 (Additional THGR268 Temperature/Humidity Remote Sensors may be ordered below)
All batteries

Price: $79.95

1 Extra THGR268 Extra remote sensor
Add $39.00

2 Extra THGR268 remote sensors
Add $78.00

Quantity:

N2011 Temperature Data Logger & Recorder
Diligence EV temperature and humidity data loggers: compact, durable, lightweight and designed for use in many applications including the food, pharmaceutical and chemical industries and the monitoring of medicines and other sensitive materials in transit or storage. The loggers are also ideal for building services, scientific experiments, production processes and heating, ventilating and air conditioning systems.

N2011 features:-
* LCD display for temperature readings and alarm indication
* Internal sensor with measurement range -40°C/-40°F to + 70°C/+158°F
* All models feature:-
* Tough, moulded cases, dust and waterproof to IP67 standards
* Large memory capacity of up to 16, 000 readings
* Ability to log over multiple periods
* Compatibility with the versatile Comark EV software package, shared with the N3014 Graphic Display Monitor and EVt data loggers This software is available in two versions, with the professional version aiding compliance with the pharmaceutical industry regulation 21CFR Part 11
* Single, multi-function button
* LED indicators to show active logging and alarm conditions, plus audible alarm warning
* Temperature system accuracy, suitable for food industry applications
* Long battery life
* Two year warranty
Sensor Type - Internal Thermistor
Measurement Range - -40°C to +70°C/-40°F to +158°F
Scales - °C or°F
Display Resolution - 0.1°
System Accuracy
-25°C to +50°C              ±0.5°C
-13°F to +122°F             ±1°F
-40°C to +80°C            ±1°C
-40°F to +176°F           ±2°F
-40°C to +150°C             ±2°C (typical)
-40°F to +302°F             ±4°F (typical)

Memory 32K - 16000 samples
Communications - via infra-red interface
Download Time - 3 minutes for 10, 000 readings (typical)
Logging Frequency - Programmable between 1 second and 99 hours
Internal Sensor Response Time - T90 =15 to 30 minutes in ambient air
Ambient Storage - -40°C/-40°F to +70°C/+158°F
Logging start - Programmable date and time or manual start from instrument multi-function button
Software - Windows based Evolution software requiring Windows 95, 98 XP or NT operating systems
Battery - 1 x AA size 3.6V replaceable lithium battery, part number A17476
Battery Life - Up to 5 years
Case Material - ABS
Environmental Protection - IP67, EN60529, IEC529
LED Indication:
Red = alarm
Green = logger active
Dimensions - L 88mm/3.5ins (including fixing lug) W 80mm/3.1ins D 35mm/1.4ins

Price: $138.00

USB Computer Interface and Software
Add $79.00

Quantity:

N2013 Temperature & Humidity Data Logger & Recorder

Diligence EV temperature and humidity data loggers: compact, durable, lightweight and designed for use in many applications including the food, pharmaceutical and chemical industries and the monitoring of medicines and other sensitive materials in transit or storage. The loggers are also ideal for building services, scientific experiments, production processes and heating, ventilating and air conditioning systems.

N2013 features:-

* LCD display for temperature and humidity readings and alarm indication
* Internal temperature and external humidity sensors
Measurement ranges:
Temperature -20°C/-4°F to + 60°C/+140°F
Humidity 0 to 97% RH non condensing

All models feature:-

* Tough, moulded cases, dust and waterproof to IP67 standards
* Large memory capacity of up to 16, 000 readings
* Ability to log over multiple periods
* Compatibility with the versatile Comark EV software package, shared with the N3014 Graphic Display Monitor and EVt data loggers This software is available in two versions, with the professional version aiding compliance with the pharmaceutical industry regulation 21CFR Part 11
* Single, multi-function button
* LED indicators to show active logging and alarm conditions, plus audible alarm warning
* Temperature system accuracy, suitable for food industry applications
* Long battery life
* Two year warranty

Measurement
Range
Temperature
Humidity

Scales
Temperature
Humidity

Display Resolution
Temperature
Humidity

System Accuracy
Temperature
-25°C to +50°C
-13°F to +122°F
-40°C to +80°C
-40°F to +176°F
-40°C to +150°C
-40°F to +302°F
Humidity
-20°C to +60°C
-4°F to +140°F

Memory 32K
1 channel
2 channels

Communications
Download Time
Logging
Frequency
Internal Sensor
Response Time
Ambient Storage
Logging Start

Software

Battery

Battery Life
Case Material
Environmental
Protection
LED Indication
Red =
Green =
Dimensions

-20°C to +60°C/-4°F to +140°F
0 to 97% RH non condensing

°C or °F
RH or DP

0.1°
0.1% RH

±0.5°C
±1°F
±1°C
±2°F
±2°C (typical)
±4°F (typical)

±3% RH
±3% RH

16000 samples
8000 samples

via infra-red interface
3 minutes for 10, 000 readings (typical)

Programmable between 1 second and 99 hours

T90 =15 to 30 minutes in ambient air
-40°C to +70°C/-40°F to +158°F
Programmable date and time or manual start from instrument
multi-function button
Windows based Evolution software requiring
Windows 95, 98, NT or XP operating systems
1 x AA size 3.6V replaceable lithium battery,
part number A17476
Up to 5 years
ABS

IP67, EN60529, IEC529

alarm
logger active
L 88mm/3.5ins (including fixing lug) W 80mm/3.1ins D 35mm/1.4ins

Price: $249.00

USB Computer Interface and Software
Add $79.00

Quantity:

N2014 Temperature Data Logger
Diligence EV temperature and humidity data loggers feature compact, durable, lightweight design for use in many applications including the food, pharmaceutical and chemical industries and the monitoring of medicines and other sensitive materials in transit or storage. The loggers are also ideal for building services, scientific experiments, production processes and heating, ventilating and air conditioning systems, and countless other applications.

Features:

Four total channels with up to 3 external thermocouple probes
Connect up to 3 external type K Thermocouple probes via the N2000ADP/K adaptor cable (included)
Audible & visual alarm indications
LCD display for temperature readings and alarm indication
Wide measurement range from -200°C to +1372°C (type K)
Tough, molded cases, dust and waterproof to IP67 standards
Large memory capacity of up to 16000 readings
Ability to log over multiple periods
Compatibility with the versatile and proven Evolution Windows™ software
Single, multi-function button
LED indicators to show active logging and alarm conditions, plus audible alarm warning
Long battery life of up to 5 years
Two year warranty
Requires N2000 Interface Cradle with EVSW Software (See option 1. One required per PC regardless of the number of N2014 loggers you purchase.)

Click here to see the probes for use with this data logger
Price: $229.00

USB Computer Interface and Software
Add $79.00

Quantity: