Tech Instrumentation >> ThermoProbe

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Product Sections

Closeouts and Specials

Anemometers & Airflow

Electrical Instruments

Thermometers sorted by type

Hygrometers, Timers & Moisture Meters

Wireless Instuments

Tools

Products by Industry

Manufacturer

Applications - Products by Special Application

Main Pages

Welcome the Tech Instrumentation Online Store. Please select from a category below...

Additional Information

Call us at 800-390-0004 for quantity or resale discounts.

Online Catalog | Manufacturer | >> ThermoProbe

TL1A Series

The TL-1A thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used.

The TL-1A is an improved version of the original ThermoProbe model TL-1. The TL-1A incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the TL-1A has accuracy, repeatability and long-term stability. But unlike those thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most electronic thermometers, the “Cordless” TL-1A has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration or battery removal. Low battery display, and failure mode indications protect the user from false data.

4 Point NIST Traceable Calibration and a one year warranty included. We can add a certification point at 115 degrees for an extra charge.

Specifications:

Display:	LCD with 0.25 inch characters Trend Indicating Arrows Low Battery & Fault indication
User Functions:	Auto Off after 20 minutes or continuous operation Lowest Reading, Highest Reading, Average Reading Switchable in Units of °F or °C
Construction:	Stainless Steel temperature sensor; Standard length is 8", 21cm with narrow sensing tip. Standard probe diameter is 1/4" (6.35mm) with reduced diameter tip of 3/16" (4.76mm) Sensor mount acetyl plastic Electronics and display in 3.5" x 1.2" anodized Aluminum enclosure Molded Silicone seal. Highly durable display window, graphics and membrane switches.
Weight:	3 ounces, 93 grams
Temperature:	-44 to 600°F, -43 to 315°C Complete Range Resolution 0.01 Degrees Calibrated Accuracy (NIST Traceable Report of Test): ±0.1°F from 14 to 320°F ±0.07°C from -10 to 160°C Typical (untested) Accuracy: +-0.2°F below 14 and above 320°F +-0.12°C below -10 and above 160 °C (Special calibrations are available to guarantee accuracy outside of the normally guaranteed range)
Temperature Response:	14 seconds in water bath.
Electronics:	Ultra Low Power Microcontroller FLASH Memory 20 bit A/D Converter Recommended Temperature Range For Best Accuracy 32 to 112 °F, 0 to 44°C 100 Ohm, Class A 1/3 DIN RTD Immersion depth 4", 11cm
Battery:	20mm Coin Size 3V Lithium, Duracell Type CR2032 400 hour service life at 70°F, 21°C Battery Operating Range -4 to 130°F, -20 to 54°C Note: Battery may not provide adequate power below 40°F, 4°C
Options:	Stem length to 39", 1 m. Custom lengths available. Separate probe with high temp PFE cable Available in rugged field version, TL-1W Certification by independent calibration laboratory
Future:	Intrinsically Safe Certification Serial Cable and User Software

Due to the special calibration on these meters, please allow approximately 7 to 10 days to ship. Includes certificate of calibration at the following approximate points: 32, 120, 199 (200) and 300 degrees F. We can also certify at 115 degrees F for an extra charge (below)

Price: $475.00

Choose either TL1A without Extra Point Certified
No Extra Charge

Select Stem Length

Or Choose the TL1A with the extra 115 Degree F Certification
Add $76.00

Select Stem Length

Quantity:

TL1W Series

The TL-1W is a modified field version of our successful TL-1 thermometer.
It features a rugged frame for reinforcement and is designed for continuous operation but can be easily powered off if desired.

The TL-1W thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used. The TL-1W incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the TL-1W has accuracy, repeatability and long-term stability. But unlike those thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most precision electronic thermometers, the “Cordless” TL-1W has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration or battery removal. Low battery display, and failure mode indications protect the user from false data.

4 Point NIST Traceable Calibration and a one year warranty included.

Specifications:

Display:	LCD with 0.25 inch characters Trend Indicating Arrows Low Battery & Fault indication
User Functions:	Auto-off after 20 minutes Lowest Reading, Highest Reading, Average Reading Switchable in Units of °F or °C
Construction:	Stainless steel temperature sensor; Standard Sensor length 8” (20cm) Standard diameter 1/4" (6.35mm) with reduced diameter tip of 3/16" (4.76mm) Sturdy Acetal frame surrounding aluminum enclosure Electronics and display in 3.5” x 1.2” anodized Aluminum enclosure Molded Silicone seal. Highly durable display window, graphics and membrane switches.
Weight:	6.5 ounces, 180 grams
Temperature:	-44 to 600°F, -43 to 315°C Complete Range Resolution 0.01 Degrees Calibrated Accuracy ±0.1°F from 14 to 320°F ±0.07°C from -10 to 160°C Includes NIST Traceable Report of Test ----------------------------------------- Typical (untested) Accuracy +-0.2°F below 14 and above 320°F +-0.12°C below -10 and above 160 °C
Temperature Response:	14 Seconds in water bath.
Electronics:	Ultra Low Power Microcontroller FLASH Memory 20 bit A/D Converter Recommended temperature range for best accuracy 32° to 112°F, 0° to 44°C
Sensor:	100 Ohm, Class A 1/3 DIN RTD Immersion depth 4", 11cm
Battery:	2 AAA Duracell MX2400 Battery Life several hundred hours depending on backlight usage Battery Operating Range -4 to 130°F, -20 to 54°C Note: Battery may not provide adequate power if ambient temperature is below 40°F, 4°C or above 130°F, 54°C
Options:	Stem length to 39”, 1 m. Custom lengths available. Separate probe with high temp PFE cable Certification by independent calibration laboratory

Due to the special certification on these meters, please allow approximately 7 to 10 days to ship. Includes certificate of calibration at the following approximate points: 32, 120, 199 (200) and 300 degrees F.

Price: $590.00

Choose either the TL1W With No Extra Point Certified
No Extra Charge

Select Stem Length

Or Choose the TL1W With The Extra 115 Degree F Certification
Add $76.00

Select Stem Length

Quantity:

TP-7 Series by ThermoProbe
The TP7 has been developed for ease of use with its reel-case design. In addition to the case,
the TP7 is designed to provide very high reliability, less maintenance, an extended temperature
range, and high accuracy without a higher price. This has been achieved by utilizing a
platinum RTD temperature sensor, using low power programmable electronics, improving
the packaging and integrating field proven components. Other hardware items include the
stretch cord grounding assembly and reel locking mechanism.

To endure the environment, the TP7 is manufactured of materials which are both immune
to petrochemicals and are non-sparking. The enclosure is made of high impact plastic which
dissipates static electricity and has proven to be tolerant to most petrochemicals, caustics or
acids. As with all ThermoProbe instruments, the probe assembly is constructed with a very
flexible, static-dissipating, aramid fiber reinforced, non-stick cable, and stainless steel sensor
components. To ensure longevity of the user interface the faceplate is fabricated of engraved
aluminum plate, a scratch resistant polycarbonate window and an O-Ring sealed switch.

Operational Attributes
Easily replaceable 9V Battery, provides an average of 50 hours operation. If probe assembly
replacement is necessary, the terminals allow simple connection of the wires. Circuit
logic automatically indicates low battery condition, shows readout integrity before each
operation, automatically shuts off after two minutes and displays error codes for failure
determination. The low power backlight for night operation is photo sensor controlled for
convenience and battery conservation. Celsius or Fahrenheit units with C/F indication can
be easily chosen by an internal selector without recalibration.

Includes:

NIST traceable calibration certificate
Limited Warranty
ThermoTab Gauging Software for PalmOS

Maximum Dimensions:	13.5 x 7.25 x 4.5 in. 34.3 x 18.4 x 11.4 cm
Total Weight:	3 lbs with 75 ft. of cable 1.4 kg with 23m of cable
Battery Type:	Type: 9 volt Alkaline, approved types listed on device. Life: Approximately 50 hours Battery manufacturer's battery operating temperatature range -4° to 130°F, -20° to 54°C Note: Battery may not provide adequate power if ambient temperature is below 40°F, 4°C or above 130°F, 54°C
Case Materials:	Polypropylene Blend, Stainless Steel and Aluminum.
Limited Warranty:	90 days on Probe Assembly 1 year on other components
Probe:	Class A Platinum RTD in Stainless Steel Probe with static dissipating cable jacket and Aramid Fiber reinforcing for cut and smash resistance. Cable insulation are flourocarbon polymers such as FEP, PFA, or similar materials.
Temperature Range & Accuracy:	Resolution 0.1 Degrees Range* 14 to 370°F, -10 to 188°C *Lower Range Available For Cold Climates Calibrated Accuracy: ±0.2°F from 32 to 200°F ±0.5°F, from 200 to 300°F ±0.1°C from 0 to 100°C ±0.3°C from100 to 150°C Long term drift not to exceed 0.05%/ yr Meets API requirements.
Options:	• Extra Weight Probe • Asphalt Weight Probe • Extra Length Sensor • Railcar Sensor • Custom Temp. Ranges • Independent Lab Certification

Price: $975.00

50 Ft/15m Probe length

75 Ft/23m Probe length

Quantity:

Online Catalog > Manufacturer > >> ThermoProbe

Call us at 800-390-0004 for quantity or resale discounts. We will meet or beat any legitimate price you find!