Tech Instrumentation Panel Thermometers

SP120
The SP120 is a solar powered thermometer with a battery backup. Features include an F/C switch, 8 second update rate and a 10 ft. cord. " Dimensions: 2.75" X 2.75" X 0.75".

Temperature Range	-58° to 158°F/-50° to 70°C

Temperature Accuracy	±3F°/±1.5°C

Switchable °F/°C	Yes

Resolution	0.1°F/C

Features	• Solar power with 1.5v battery (1) A76 back-up

	• 1.875x0.625"/4.75x1.58cm LCD

	• 10 ft/254cm lead

	• 30 Second Response Time

	• 1 Year warranty

Price: $37.00

Quantity:

CATALOG SUSPENDED

PM120
Compact Electronic Panel Thermometer, 2.6" x 1.4" x 1" deep, -40/120F, 39" sensor lead, 1/2" LCD Digits, 1/10 of a degree resolution, 2 degree accuracy. Cutout size 2.375" x 0.781". Includes AA Alkaline battery. See model 9302 mounting flange.

Price: $24.00

Quantity:

CATALOG SUSPENDED

PM200A-01
The PM200A-01 requires a 12VDC Power supply. It has a range of -40/300F and features 1/10 degree F resolution and 0.3 degree or 0.5% of reading accuracy. Use with Cooper 10K thermistor probes that can be located up to 1000 ft. from the meter. No special extension wire is required for probe extension. Includes a dual set point high/low internal alarm that provides an audible and visual indication of an alarm condition. Alarm setpoints are maintained even after a power loss and can be disabled if desired.

Price: $259.00

Quantity:

CATALOG SUSPENDED

PM200A-76
The PM200A-76 requires a 115VAC Power Supply. It has a range of -40/300F and features 1/10 degree F resolution and 0.3 degree or 0.5% of reading accuracy. Use with Cooper 10K thermistor probes that can be located up to 1000 ft. from the meter. No special extension wire is required for probe extension. Includes a dual set point high/low internal alarm that provides an audible and visual indication of an alarm condition plus an external relay output. Alarm setpoints are maintained even after a power loss and can be disabled if desired. Note that this can not be used as a controller since the alarms must be manually reset via pressing any keypad button.
Price: $319.00

Quantity:

CATALOG SUSPENDED

DPM300-ALM

Features:

Mini Digital Panel Meter
High and Low Alarms
°F/°C switch
On/off switch
Low battery indicator
1 7/8" Stainless steel sensor
Digital display
Snaps into Panel, or can be mounted using suction cup on back of unit

Specifications:

Temperature range: -58 to 302 F (-50 to 150 C)
Accuracy: -58/-4F, +/-3.6F (2C). -3.9/122F, +/-1.8F(1C). 122.1/212F, +/-3.6F(2C). 212.1/302F, +/-5.4F(3C).
Probe size: 1.875"
Cord length: 3' (1 m)
Resolution: 0.1 degree
Digit height: 0.75"
Display size: 1.85" x 0.85"
Power source: 1 “LR44” battery
Unit size: 2.4” x 1.4” x 0.5”

Supplied With:

LR44 battery

Price: $24.00

Batteries - Package of 6
Add $11.70

Quantity:

CATALOG SUSPENDED

DPM560FF & DPM560BF
2” Digital Solar Thermometers

Model DPM560BF
Stainless Steel Back Flange Type, Flush Mount
Model DPM560FF
Stainless Steel Front Flange Type, Recessed Mount
Both Models
Battery Back-up, °F/°C Switch
Temperature Range: -58° to 302°F (-50° to 150°C)
Cord Length: 36”, Dimensions (Ø x D): 2-1/4” x 1”

Price: $49.00

Select FlangeType

Quantity:

CATALOG SUSPENDED

93507
Waterproof wall mount thermometer with Model 50361 armored meat probe.

The model 50361 waterproof wall mount thermometer is great for any application requiring a rugged, waterproof thermometer. Power is supplied using a standard 9 volt battery.

Temperature Range: -100° F to 1000° F
Temperature Accuracy: +/- 2° F, +/- 5% of reading
Water Resistant: Waterproof
Power Supply: (1) 9V battery
Battery Life: 2000 hours
Includes: Armored meat probe, Model 50361-K (Not Shown)
Accepts any Type K Thermocouple Probe with standard plug.

Price: $259.00

Quantity:

CATALOG SUSPENDED

93507-ONLY
The model 93507 waterproof wall mount thermometer is great for any application requiring a rugged, waterproof thermometer. Power is supplied using a standard 9 volt battery.

Temperature Range: -100° F to 1000° F
Temperature Accuracy: +/- 2° F, +/- 5% of reading
Water Resistant: Waterproof
Power Supply: (1) 9V battery
Battery Life: 2000 hours
Accepts any Type K thermocouple probe with a standard mini connector (Probe not included)
4.25" W x 3.00" H x 2.75" D

Click here to see the probes for use with this thermometer
Price: $219.00

Quantity:

CATALOG SUSPENDED

SP160
The SP160 is a solar powered thermometer with a AA battery backup. Accuracy is spec'd at +/- 1F. Range is -58/158F. Dimensions: 4.5" X 1.125" X .195" with a 4 ft. cord. Other cord lengths available per special request. Please call for details.

Price: $29.00

Probe Cord Length

Quantity:

CATALOG SUSPENDED

2020K
Probe for Type K Panel Meter Thermometers
Price: $43.00

Quantity:

CATALOG SUSPENDED

2015
Air Probe for Cooper Thermistor Panel Thermometers
Price: $34.00

Quantity:

CATALOG SUSPENDED

6020
Waterproof Probe, Flexible, for Cooper Thermistor Panel Meters

Price: $45.00

Quantity:

CATALOG SUSPENDED
People who bought this item also bought:

1. TC100A-E

7010 Probe
The model 7010 Air/Surface Probe is for use with all Cooper-Atkins thermistor based units. This Air/Surface probe includes a phono plug for use with Cooper-Atkins hand held units. Use without the plug for the Cooper-Atkins PM200 and PM210 series panel meters. The lead may be extended up to 1000 ft with your wire.

Technology Base: Thermistor
Temperature Range: -40 to 200°F / -40° to 93°C
Max Tip Temperature: 200°F / 93°C
Max Cord Temperature: 200°F / 93°C
Response Time: 20 seconds
Shaft Length: 0.5” / 12.7 mm
Cord Length/Material: 6” (152.4 mm) polyurethane
Warranty: 1 Year
Price: $44.00

Quantity:

CATALOG SUSPENDED