Tech Instrumentation Infrared Thermometers

Bright, built-in DUAL Laser provides easy aiming and defined target area.
The target area is highlighted at all distances with two laser dot markers. At the focal point,
where the spot size is the smallest, the dots line up vertically, rotating as the IRTN425LE is
moved closer or further from the target.

Temperature Range: -76° to 1832° F (-60° to 1000° C)
Distance to Spot Size Ratio of 50:1
Accuracy +/- 2% of reading on full scale with 1/10th degree resolution
Adjustable Emissivity from 0.10 to 1.00 in 0.01 steps
Measures MAX, MIN, DIF and AVG temperatures
Amber back-light LCD display,
C or F
Auto Off in 60 seconds
Display error messages: Thermal Shock, Low Battery and more
Uses 2 x AAA batteries (included) to provide 180 hours of use

PLUS:

Programmable HI and LOW audible temperature alarms
Hard ABS padded plastic carry case included
Heavy duty magnet in base of handle
High intensity white LED flashlight

Weight and Dimensions:

16 ounces (with batteries,magnets); 8 x 8 x 2.8 inches

Price: $279.00
Quantity:

IRTN408
Professional infrared laser thermometer with advanced temperature processing; In addition to the non contact temperature measurement this model offers the ultimate in flexability by including a built-in socket that accepts commercially available K-type thermocouple probe (See options) for internal temperature measurements.

Features:

• Laser sight for easy targeting
• Infrared Temperature Range -76° to 932°F (-60° to 500°C)
• Infrared Accuracy ±2% of reading or ±2°C
• Thermocouple Accuracy ±1% of reading or ±1°C whichever is greater
• 0.1° resolution for accurate readings
• Selectable temperature units F/C
• 11:1 Distance to spot size ratio
• Emissivity (preset to 0.95) is Adjustable from 0.10 to 0.95 in 0.01 steps
• Bright large amber back-lit LCD display
• Measure modes (selectable for IR or probe) include Maximum, Minimum, Difference (Max-Min) and “Lock” for continuous temperature scanning (Lock also disables the automatic shutoff for longer term tests)
• Programmable High and Low temperature Alarms with audible “beeper”
• 2 AA batteries (included) typically provide 180 hours continuous operation
• Automatic power OFF after 1 minute (Disabled when thermometer is in Lock mode)

For air or internal temperatures, you may add the plug in thermocouple probe model 31901K Needle Probe or 31903K Air Probe. See the optional probes below, or choose from any of our other type K thermocouple probes.
Click here to order other optional thermocouple probes for use with this thermometer

New Low Price
Price: $89.00

Optional Model 31901K Needle Probe (for internal temperatures)- Add $60.00

Optional Model 31903K Air Probe (for air & gas temperatures) - Add $69.00

Optional Model 14057 Padded carry pouch with belt loop
- Add $21.00

Quantity:

IRTN424-2L

Dual Laser Professional IR Thermometer

Long range and HIGH temperature infrared thermometer with LED Flashlight

Temperature Range: -76° to 1600°F (-60° to 860°C)
Distance to Spot Size Ratio of 30:1
Bright, built-in DUAL Laser provides easy aiming AND target area identification
Accuracy +/- 2% of reading with 1/10th degree resolution
Adjustable Emissivity from 0.10 to 0.95 in 0.01 steps
Measures MAX, MIN, DIF and AVG temperatures
Amber back-light LCD display, select °C or °F, Auto Off
Uses 2 x AAA batteries (included) to provide 180 hours of use

PLUS:

High intensity flashlight
Programmable HI and LOW audible temperature alarms
Hard ABS padded plastic carry case included

Weight and Dimensions:

11.3 ounces (with batteries); 9 x 6 x 2.8 inches

Price: $229.00
Quantity:

IRTN40-20-WR
Professional infrared laser thermometer with advanced temperature processing; In addition to the non contact temperature measurement this model offers the ultimate in flexability by including a built-in socket that accepts commercially available K-type thermocouple probe (See options) for internal temperature measurements.

Features:

• Laser sight for easy targeting
• Infrared Temperature Range -76° to 1400°F (-60° to 760°C)
• Infrared Accuracy ±2% of reading or ±2°C
• Thermocouple Accuracy ±1% of reading or ±1°C whichever is greater
• 0.1° resolution for accurate readings
• Selectable temperature units F/C
• 20:1 Distance to spot size ratio (the diameter of the measured target area increases by 1" for every 20" the thermometer is from the target)
• Emissivity (preset to 0.95) is Adjustable from 0.10 to 0.95 in 0.01 steps
• Bright large amber back-lit LCD display
• Measure modes (selectable for IR or probe) include Maximum, Minimum, Difference (Max-Min) and “Lock” for continuous temperature scanning (Lock also disables the automatic shutoff for longer term tests)
• Programmable High and Low temperature Alarms with audible “beeper”
• 2 AA batteries (included) typically provide 180 hours continuous operation
• Automatic power OFF after 1 minute (Disabled when thermometer is in Lock mode)

For air or internal temperatures, you may add the plug in thermocouple probe model 31901K Needle Probe or 31903K Air Probe. See the optional probes below, or choose from any of our other type K thermocouple probes.
Click here to order other optional thermocouple probes for use with this thermometer
Price: $229.00

Optional Model 31901K Needle Probe (for internal temperatures)- Add $42.00

Optional Model 31903K Air Probe (for air & gas temperatures) - Add $49.00

Optional Model 14057 Padded carry pouch with belt loop
- Add $19.00

Quantity:

IRWP303HACCP

Features:

HACCP Check mode (Hazard Analaysis and Critical Control Point) features 3 visible LED icons to indicate whether the temperature is within FDA guidelines for frozen or hot foods.
Water Resistant!
Dual purpose thermometer featuring non contact infrared for surface temperature and an attached swing-out stainless steel probe for internal temperature.
Min/Max. mode
Lock mode for continuous readings of up to 30 minutes for infrared temperatures and 4 minutes for internal readings.
Dual display
°C or °F selectable
Adjustable emissivity
Auto power off
Low battery indication
Distance to spot ration: 2.5:1

Specifications:

Infrared Range: -67°F to 572°F (-55-250°C)
Infrared Resolution: .5°F (.2°C)
Infrared Accuracy: 1.8°F up to 150°F, ±1.5% of reading thereafter
Swing-Out Contact Probe Range: -67°F to 626°F (-55-330°C)
Swing-Out Contact Probe Resolution: .5°F
Swing-Out Contact Probe Accuracy:
Below 23°F: 1.8°F
23°F-150°F: 0.8°F
Above 150°F: ±1% of reading
Dimensions: .87"x1.5"x7.48")
Weight with battery: 3.15 oz.
Stainless Steel Probe length: 4.5"

Supplied With:

(2) AAA 1.5 v batteries
Price: $109.00
Quantity:

IR-FI40L
Professional Grade “Food Inspector” Infrared Thermometer

Ideal for Refrigerator, Freezer and Transportation

The FI40L is the last word when HACCP accuracy for food inspection is demanded. This is one the most advanced infrared thermometers manufactured today.

The FI40L is the last word when HACCP accuracy for food inspection is demanded.
This is one the most advanced infrared thermometers manufactured today.

Features:
Temperature Range: -67º to 536 ºF (-55º to 280ºC)
Distance-to-Spot Size Ratio of 12:1
Bright, built-in Class II laser provides easy aiming
Accuracy:
Between 32º to 150 ºF: ±1ºC (2ºF) with 1/10th degree resolution complying with HACCP recommendations
Below 0ºC (32ºF): ±(1ºC ± 0.1 degree/degree)
Above 65ºC (150ºF): ±1.5% of reading

Emissivity preset for food applications
Features a special thermopile detector for improved immunity to water vapor
Back-lit LCD display, select ºC or ºF, Auto Off
Uses 2 AAA batteries providing 180 hours of continuous use (a tremendous savings over traditional 10 hour 9 Volt batteries)
Weight and Dimensions: 7 oz. ~ 3” x 6” x 1.5”

An important note about thermal shock:
The FI40L maintains accuracy under widely changing environmental conditions. For a 10°C change in ambient temperature, competitive models exhibit measurement errors of about 2ºC requiring 30 minutes to stabilize. By contrast, the FI40L exhibits an error 3 times smaller and recovers 4 times faster.

Price: $98.00
Quantity:

412

412 Infrared with Laser & Thermocouple Jack

The 412’s innovative design incorporates a Non-contact Infrared Thermometer to measure surface temperature with a Thermocouple Jack to measure internal temperature.

The 412 features a Distance to Spot Ratio of 11 to 1. It is loaded with features including single-dot laser sighting, high and low alarms, back-lit LCD for easy viewing, automatic data hold and AVG, MAX, MIN, DIF and Locks Modes.

Temperature Range	-76° to 932°F/-60° to 500°

Temperature Accuracy	±4°F/±2°C or 2% of reading whicher is greater

Resolution

F/C Switchable	Yes

D:S	11:1

Emissivity	Adjustable (Range: .01 to 1.00)

Certification	CE

Features	• Single point laser

	• High & low alarms

	• Backlit LCD for easy viewing

	• Automatic data hold

	•Accepts any Type K thermocouple probe

	• Measure Modes: AVG, MAX, Min, DIF & Lock

	• Type K temperature Range: -83° to 1999°F/-64° to 1400°C Probe not included

	• 1 year warranty

Price: $161.00
Quantity:

Online Catalog > Products by Industry > >> HVAC/R Instrumentation > Tools & Instruments for HVAC Service > Infrared Thermometers

Call us at 800-390-0004 for quantity or resale discounts. We will meet or beat any legitimate price you find!