Call us at 800-390-0004 for quantity or resale discounts.

DTT361
Perfect Roasts / Meat & Food Every Time are possible with the DTT361. The 3 ft. cord has a stainless steel overbraid so you can leave the 6" probe in the meat while it's cooking. Set the temperature on the DTT361 and it will beep when your meat is done. You can also monitor the temperature while it's cooking which enables you to adjust the oven temperature if you find it's not cooking fast enough. Great for BBQ's! Can be used with steak, chicken, fish etc. This is a "must have" tool for every serious cook!

Features & Specifications
3 ft. stainless steel overbraid cord
Magnetic back & flip out stand
Temperature Range 32 to 392 F (0 to 220 C)*
Includes AAA Battery (approximate 1 year battery life)
Built in Clock / Timer

*Special Comments
 This product has been used with excellent results by many thousands of customers but there are a couple of points that must be remembered in order to provide you with the best experience.  The first caution is that the probe tip and wire are rated for a maximum temperature of  392 degrees.  This means that the probe will be damaged if the tip or cord are exposed to open flames, direct contact with heating elements, very hot ovens or BBQ's etc.  The cord is designed to allow an oven door to close on it without damage, but if there is an extremly sharp bend in the cord (certain BBQ lids for instance can do this), the cord can be damaged.  When cleaning the probe, don't allow water to flow down inside of the probe tube or plug as the readings will be inaccurate until it dries out.  It should only be cleaned with a damp, soapy cloth.  Wiping it down with alcohol is fine too when you want to sterilize it.  Just be sure to allow the alcohol to dry before use in foods again.  While failure to follow these simple precautions may void your warranty, following these few reasonable precautions will provide you with years of  perfectly cooked foods!

Click here to order replacement probes for the DTT361 (without the base unit)

Price: $41.00


9335 - Optional Extra Probe
Add $17


Quantity:  

DTT361
FT24 Timer
The FT24 Timer by Cooper features an adjustable volume with flashing light. It's loud enough to be heard in a noisy commercial kitchen.

Hour, Minute, Second plus Memory & Memory Clear buttons
Large Start/Stop button on top of timer
Large Display is 2 1/4" x 1 3/16"
White ABS Plastic Case
7" High x 4" Deep x 5 9/16 Wide
(4) "C" batteries are included
Price: $54.00

Quantity:  

FT24 Timer
TFS4

The Cooper-Atkins TFS4 Timer is a high performance and durable multi-station timer that has 4 different timer modes that can be used independently or simultaneously.  Flashing lights and a loud adjustable volume make this timer ideal for applications where extra loud or soft volumes are required.

Features:
Large LCD Display for easy viewing
Bright Flashing Lights for easy alarm identification
Four Distinctive Sound Alerts with adjustable volume can be heard across a large room
Each channel can be set for Hours & Minutes or Minutes & Seconds
Counts Up and Down
Recall feature means you don't have to keep reprogramming repetitive times
One Touch, Large easily accessible Start / Stop Button on the top of the unit.
Hangs on a wall or stands on a flat surface with non skid rubber feet
Splash Proof Keypad is ideal for kitchens and other wet environments
7" Tall,  7" x 4" Base


Includes:

Operating Instructions (pamphlet & easy reference decal on back of unit)
4 C cell batteries


This item should be available for shipment sometime in June.
Price: $60.00

Quantity:  

TFS4
TTM59
Pocket Test Plus Thermometer with 3 Timers
Features:  
LCD has digital clock and date (month & day) read out and the ability to choose standard or military time formats
3 separate timers and distinctive alarms
Certifications:  NSF, CE
Temperature Range:  -4° to 350°F / -20° to 177°C
Temperature Accuracy:  ±1°F / ±0.5°C
Resolution:  0.1°F/C
LCD Height:  0.4" (1 cm) with 0.2" (5 mm) characters
Waterproof Rating:  IEC 529 IPX7
Housing Material:  Polycarbonate housing and sheath with silicone rubber buttons
Sensor Type:  Thermistor
Response Time:  Less than 6 sec
Shaft Length:  4.75 in (12.07 cm) type 304 stainless steel
Shaft Diameter:  0.15" with 0.085" reduced diameter tip (3.8mm with 2.1mm tip)
Battery Type:  CR2032, 3V Lithium
Weight:  0.11 lb (52 gms)
Dimensions:  1.75" x .8" x 6.625" (4.4 cm x 2 cm x 16.8 cm)

Price: $38.00

Quantity:  

TTM59
TC6
Electronic Timer with Stopwatch & Clock.

Counts up or down
Memory recall
Easel Stand, Wire Hanger, Clip on and Magnet Mount
Approximate dimensions: 2.75" x 2.38" x 0.75"
Alarm sounds for 1 minute after unit alarms then counts up until Start/Stop is pressed
Price: $22.00

Quantity:  

TC6
TM60
TM60 Long-Ring Mechanical Timer
Features:
Bell rings for 8 seconds
Sturdy molded case
Non-skid rubber feet
Easy to read dial
One-handed operation
Resolution:  1 minute
Channels:  1 station
Weight:  0.27 lb (125 gms)
Dimensions:  3.5 x 3.25 x 4" (8.9 x 8.3 x 10.2 cm)
1 year Warranty
Price: $15.00

Quantity:  

TM60
TS100
Electronic Countdown Timer


99 Minute
Easy repeat feature - Just press start to restart at prior setting
Includes Neck Rope & Battery


Price: $17.00

Quantity:  


People who bought this item also bought:
1. TI150V
TS100

Call us at 800-390-0004 for quantity or resale discounts. We will meet or beat any legitimate price you find!

Free Sitemap Generator